Fluffy Foundation Mousse

Color Cosmetics, Skin Care

Fluffy Foundation Mousse

This formula, courtesy of Coast Southwest, features Sensoderm CCC.

By: TOM BRANNA

Editor

Ingredients

%

Phase A

Deionized Water (Water)
50.40

Propylene Glycol USP (Propylene Glycol)
3.00

Glycerin 99.7% USP Kosher (Coast Southwest, Inc.) (Glycerin)
2.50

Disodium EDTA
0.10

Endicare DLP-50 (Coast Southwest, Inc.) (Panthenol)
0.50

Phase B

Flocare PSD 30 (Coast Southwest, Inc., SNF SAS) (Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer)
1.50

Phase C

Sensoderm CCC (Coast Southwest, Inc., 3V Sigma USA) (Coco-Caprylate/Caprate)
7.00

Sensoderm DIM (Coast Southwest, Inc., 3V Sigma USA) (Diisostearyl Malate)
3.00

Sensoderm DBA (Coast Southwest, Inc., 3V Sigma USA) (Dibutyl Adipate)
2.00

Ethoxcare SO (Coast Southwest, Inc., Ethox Chemicals, LLC.) (Sorbitan Oleate)
2.00

JD Jojoba Colorless Oil (Coast Southwest, Inc., Jojoba Desert (A.C.S.) Ltd.) (Simmondsia Chinensis (Jojoba) Seed Oil)
3.00

Endimulse EGMS (Coast Southwest, Inc.) (Ethylene Glycol Monostearate)
0.80

Hydroxystearic Acid
0.85

Emulsiderm PG6O (Coast Southwest, Inc., 3V Sigma USA) (Polyglyceryl-6 Oleate)
4.00

Mascol 16/98P (Coast Southwest, Inc., Musim Mas) (Cetyl Alcohol)
2.00

Phase D

Sodium Hydroxypropyl Starch Phosphate
0.85

Microﬁne Zinc Oxide (Zinc Oxide)
6.00

Color (Titanium Dioxide, CI-77492, Silica, CI-77491, CI-77499)
6.00

Phase E

Titanium Dioxide (and) Hydrogenated Polydecene (and) Styrene/Acrylates Copolymer
4.00

Phase F

Sharomix Amplify AM24 (Coast Southwest, Inc., Sharon Personal Care Srl.) (Methylpropanediol (and) Caprylyl Glycol (and) Polyquaternium-80 (and) Didecyldimonium Chloride)
0.50

Procedure

Phase A - In main vessel, add Phase A and begin heating to 70-75°C with mixing (200 to 300 rpm) until uniform. Phase B - At 60-65°C, add Phase B to Phase A with mixing and the solution will begin to gel. Phase C - In a side vessel, add Phase C together and mix and heat to 70-75°C. Phase D - Disperse Phase D into Phase C until a uniform opaque mixture is formed. At temperature add Phase CD to Phase AB, increasing the speed as needed until a uniform dispersion is formed. Homogenize if needed. Phase E - Once uniform, discontinue heat and cool Phase ABCD to 40-45°C. Add Phase E to batch. Phase F - Add Phase F to batch and continue to cool to room temperature.